.

| Home | What Is It? | 4WD | Construction | Home Brew | Horticulture | Mobile Homes | FAQ | Products | Ordering | Resellers | Contact |

 .
Yes. We recommend that once you receive the Air-Up System you invest in one of our quick-release couplers for the end of the hose, then you can use your air tools. Remember to keep your tools lubricated as recommended by the manufacturer and do not exceed the manufacture recommended psi.

CO2’s thermal expansion rate is similar to air. CO2 is considered a wet gas because it starts out in liquid form. The amount of moisture content per CBM of vapour is less than the air emitted from an air compressor. There are no problems running air tools.

The custom-built regulator is adjustable from 0 to 200 psi. Unlike a 240-volt air-compressor the Air-Up System is fully portable. Our coil hose is extremely lightweight and is rated at 200 psi working pressure, 1000 psi burst pressure and is half the weight of current 1/2 inch air hoses used in the construction industry. The quick-connect fittings are rated at 300 psi.
The main advantage with the Air-Up System for the Construction Industry is its 100% portability. We all know the hassles involved when working on multi-level buildings when it comes to airlines and power leads. There are no such hassles with the Air-Up System. The kit is beside you while you work at all times.

When it comes to tradespeople doing maintenance carpentry, small jobs require more time setting up to operate the compressor. The Air-Up System has no set-up hassles. Grab the kit, select the nail gun required, complete the job, it’s as simple as that.

We have designed a backpack to make the Air-Up System even more user friendly in situations where it is required. Remember, always use in an upright position and no less than 30 degrees. You need the liquid at the bottom and gas at the top of the cylinder. Liquid through the regulator could damage it.

Air-Up Handy Facts: AU-1 Cylinder = 1500 x 2 inch nails - AU-2 Cylinder = 3000 x 2 inch nails -
Leased D size = 4000

Finishing Gun

Framing Gun

Finishing Gun


To order products please contact Air-Up Australia or view our Resellers page.

All prices are in Australian Dollars (AUD) and include GST.

Prices do not include freight. Contact Air-Up Australia for your freight cost.
Refills for the AU-1 cylinder are approximately AU$20.00 & AU-2 Cylinder
approximately AU$40.00. See the Resellers page for our Refiller locations.


The Construction Kit
(Connect to leased CO2 Cylinder)

The Construction Kit consists of our SuperFlow high performance CO2 regulator and our high pressure coilhose which is rated at 200 psi with brass fittings rated at 300 psi.

For more information click here.

Made in USA

Retail
Was AU$485.00
Now AU$250.00
GST Inclusive

Cylinder 1
AU-1CYL
The CO2 cylinder is made from 6061-T6 Aluminium.
Cylinder dimensions 450 x 130mm
Empty weight 3.4 kg
Full weight 5.7 kg.

Cylinder comes full of CO2 (2.3 kg)

Made in USA

Retail
AU$270.00
GST Inclusive

Cylinder 2
AU-2CYL
The CO2 cylinder is made from 6061-T6 Aluminium.
Cylinder dimensions 515 x 175mm
Empty weight 6.6 kg
Full weight 11.1 kg

Cylinder comes full of CO2 (4.5 kg)

Made in USA

Retail
AU$320.00
GST Inclusive


Coiled Hose
AU-H3
3 metre polyurethane self coiling hose.
This USA made high pressure coil hose is as high tech as a hose can get. It stretches up to 3 m for your builders backpack.

For more information click here.
Made in USA

Retail
Was AU$110.00
Now AU$70.00
GST Inclusive


Coiled Hose
AU-H8
8 metre polyurethane self coiling hose.
This USA made high pressure coil hose is as high tech as a hose can get. It stretches up to 8 m to reach all four corners of your vehicle.

Fittings not included. (For display only)

For more information click here.
Made in USA

Retail
Was AU$120.00
Now AU$90.00
GST Inclusive

Back Pack
AU-BPK
We have designed a light weight backpack to make the Air-Up System even more user friendly. The Backpack is very comfortable and has a removable back pad with velcro tabs for easy removal for washing also shoulder strap padding and a stainless steel buckle.
Retail
Was AU$140.00
Was AU$80.00
GST Inclusive

1/4" Female Iron Coupler
AU-150
Made in USA

Retail
AU$6.50
GST Inclusive

1/4" Male Iron Coupler
AU-152
Made in USA

Retail
AU$6.50
GST Inclusive

1/4" Male Iron Connector
AU-1501
Made in USA

Retail
AU$5.50
GST Inclusive

1/4" Female Iron Connector
AU-1502
Made in USA

Retail
AU$5.50
GST Inclusive





Air-Up, the Air-Up logo and all related indicia are trademarks of & © Air-Up Australia.
Copyright © 2004-2007 Anonymous Design & Air-Up Australia.
No content from this site may be used without written permission
from Anonymous Design & or Air-Up Australia.